Everything we've shipped, newest first. Each release lists what's new, improved and fixed.
v3.4.81Aibuild CAM
Aibuild 3.4.81
The AI Agent now works in iterative feedback loops and reasons about toolpath quality. New analysis tools catch dimensional defects and high acceleration before printing, and nonplanar weaving arrives for 6-axis DED.
AI Agent
New
Reads quality and safety checksAsk “Is this toolpath good?” or “Does my toolpath have collisions?” and get specific feedback and suggested fixes.
New
Iterative by defaultAct → compute → check results → act again, from a single prompt, until the result is accepted.
Improved
Panel opens automaticallyOpens the first time you open a workflow and remembers your preference per workflow.
Fixed
Input focus, panel collapse and border alignmentTyping in numeric fields no longer jumps to the chat box; the panel collapses cleanly.
Quality checks
New
Surface ToleranceCompares the toolpath against the target mesh and shows an oversize/undersize heatmap against your tolerance.
New
Cornering AccelerationScores every corner 0–100% from feedrate, angle and segment length, and flags layers that exceed your threshold.
Improved
Zoom extents and overhang reportCentre the toolpath in one click; stray characters removed from overhang results.
Toolpathing
Beta
Nonplanar weaving for 6-axis DED and WAAMA world first: weaving infill on curved, nonplanar surfaces, generated in 2D for accurate bead spacing and mapped back to 3D.
New
Combine operator: Alternate modeSwitch between inputs layer by layer to build several parts at once or interleave strategies.
Improved
Setting diagrams for more operatorsMould Designer, Rebuild Polylines, Curvature Compensation, Split Polylines, Optimise and Overhang Analysis.
Improved
Radial, cladding and weaving settingsSmoother radial paths, bed-centre slicing, cladding seam control, and weaving overlap up to 200%.
Fixed
Multiplanar, mouse selection, bead offset and EditCleaner polylines and correct per-segment process parameter IDs.
A major release with tools to create, inspect, diagnose and improve toolpaths before you print, including the new built-in AI Agent and a reorganised printer configuration page.
AI Agent
New
AI Agent in the Workflow EditorExplains workflows and settings, suggests slicing strategies and can add operators to your workflow.
New
AI Agent for post-processorsDrafts and edits post-processor logic in the Code Editor, with a comparison step before changes apply.
Inspection
New
Inspect polylines in the 3D viewHover and click any polyline to see its layer, line type and active visualisation values.
New
Nearly 200 setting diagramsHover a setting name for a short explanation and a visual.
Printers
New
Component treeConfigure machine, tool, bed and enclosure separately, with only the relevant settings shown.
Improved
Visibility controls and Code Editor docsShow or hide tool, machine and collision meshes; documentation opens from the editor.
Toolpathing
New
Process parameters per segmentAssign different job IDs to sections of one polyline in the Edit operator.
Improved
WeavingAvailable in Radial slicing, more reliable in thin regions, seams follow the boundary, smoother paths.
Improved
Infills, performance and millingPredictable zigzag starts, connection location control, Low Detail Mode by default, smoother milling from OBJ/STL.
Fixed
Collision detection, thermal setup and travel movesComau collision accuracy, reach and collision highlighting restored, base plate snaps to the mesh.